200 series gas cooktop CG 280. Stainless steel Natural gas Width 30″ (76 cm)

– Five sealed brass burners with up to 47,200 BTU.
– Centralized controls for ease of use and operation.
– Sturdy stainless steel material with large, professional front-control knobs.
– For surface-mount installation.

Cooking zones
– 1 large center brass burner with output of 18,000 BTU.
– 2 high output brass burners with output of 10,000 BTU.
– 2 standard brass burners with output of up to 5,500 BTU.

Operation
– Control knobs with ring and output marking.
– Gas valve with fine control.

Features
– Cast-iron grates with flat, continuous surface.
– Sintered metal burners that are sealed to prevent spills from entering the burner box.
– LP kit for conversion to LP gas included.

Safety
– Automatic re-ignition.
– Quick ignition.

Planning notes
– Minimum distance between gas cooktop and ventilation must be at least 30″.
– Built-in ovens can be installed below the gas cooktop as long as there is no contact between the bottom of the cooktop and the top of the oven.
– The appliance must be set up and connected in accordance with the applicable installation specifications. A ventilation hood must be switched on during operation of the gas cooktop. The rear panel must consist of a non-flammable material. Wall trims must be heat resistant. Minimum distance from rear wall to cooktop must be 3″ and minimum distance from cooktop to counter front must be 1 78″.

Rating
– Total rating: 47,200 BTU.
– Total Amps: 15 A.
– 120 V / 60Hz
– Connecting cable 60″ with ground plug.